What are the common causes and solutions of coil making machine failures?

What are the common causes and solutions of coil making machine failures?

The coiling machine is a commonly used item in production and manufacturing, which has greatly improved the work efficiency. However, there are still many difficulties that need to be addressed throughout the application process. Below, we will discuss the common root causes and solutions of coiling machine faults.

1. Analyze and distinguish the categories and elements that cause common faults

As a controllable component in a PLC controller, electromagnetic valves can easily cause inadequate or complete failure of the solenoid valve due to their frequent action. In such cases, when inspecting individual solenoid valves, it is impossible to distinguish whether the oil circuit board is damaged, and comprehensive identification must be carried out based on the detailed situation.

2. Analysis of common problems and countermeasures for elimination

Root cause: The delivery rate is too fast or too slow; The pipe rack is welded or deformed, causing friction and contact with the inclined column at the lower part, resulting in a sluggish upward movement of the pipe rack and increased frictional resistance, resulting in the pipe rack not being in place or the tube part tilting. Elimination strategy: Adjust the long and short stroke of the cylinder rod of the pipe feeding rack again, as well as the total flow size of the cylinder solenoid valve overflow valve, to ensure that the telescopic length of the pipe feeding rack and the reciprocating action of the pipe feeding rack are gentle, ensuring that the pipe feeding rack is in place.